Honeycomb shelf, 180 mm
Hex cell with a back panel; tiles into a wall of any size.
Drag to rotateDescription
One cell, 180 mm across the flats, 112 mm deep. Cells butt face to face and tile into any shape you like; five of them read as a composition, three look accidental.
The back is closed, with two 6 mm holes for wall plugs. If you are hanging several, mark out one cell at a time and fit the next to what is actually on the wall: printed parts wander by 0.3-0.5 mm and over five cells the accumulated error shows.
A 0.6 mm nozzle at 0.28 mm layers, otherwise one cell is a nine hour print. On 0.6 it comes down to about four and a half.
Comments (1)
Повесила семь штук в прихожей, белый PLA. Смотрится дорого.