Saucer for the vase planter
Ø113 × 30 mm, a 25 mm deep dish made for the vase-planter pot.
Drag to rotateDescription
The companion piece to vase-planter. It measures 113 mm across the rim and 107 mm at the base, standing 30 mm tall on a 2 mm ring foot. The floor is solid and 3 mm thick, so nothing seeps through.
The dish opens from Ø98.6 at the bottom to Ø103 at the rim and is 25 mm deep. The planter's Ø94 foot drops into it with about two millimetres of clearance: the pot finds its own place and stays there when you water it.
At 4.7 mm the wall is noticeably stiffer than the planter's own, so the saucer will not warp once it holds water. It takes 72 cm³ of plastic, some 90 g of PLA. Print it floor down, no supports; about three hours at 0.2 mm.
